Design and Engineering Forum
[Home] [Design Resources]
[ POSTING POLICY / RULES ][Archive#1] [Archive #2] [Archive #3] [Calculators]

Variator belt drive Question
Post Reply   Forum
Posted by: antony

06/14/2004, 04:18:58

Author Profile Mail author Edit
Drive from an induction motor is taken through a variator V-belt drive which has a movable disc & a fixed disc. The requirement of the transmission is to vary the speed from a minimum to a maximum. By moving the movable disc, the pulley ratio of the belt drive can be changed. Both the V-belt & the pulley has an included angle of 28 degree. What will be the impact on the belt slippage when the included angle of the belt or pulley or both is increased to 30 degree?

C.M.Antony Thomas.







 

Powered by Engineers Edge

© Copyright 2000 - 2018, by Engineers Edge, LLC All rights reserved.  Disclaimer