Posted by: chikky ® 07/19/2004, 06:02:50 Author Profile Mail author Edit

I want detail of 4-1/2" - 14TPI UNS and 5" - 14TPI UNS threads, i. e. Major dia and pitch dia. I could not find this in machinery's handbook. Thanks

Replies to this message

Re: Details required of UNS Threads
Re: Details required of UNS Threads -- chikky	Post Reply	Top of thread	Forum

Posted by: Cragyon ® 07/20/2004, 15:42:18 Author Profile Mail author Edit

For UNS sizes above 4 inches see ASME/ANSI B1.1-1989.   Sorry, I don't have a copy handy.

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread

| |

Re: Details required of UNS Threads
Re: Re: Details required of UNS Threads -- Cragyon	Post Reply	Top of thread	Forum

Posted by: chikky ® 07/23/2004, 04:26:48 Author Profile Mail author Edit

I also don't have these standards. It would be helpful if you could give me the details only. Or is this standard available on any website for use?

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread