Determine the sound level
Post Reply   Forum
Posted by: gigivovo ®

03/03/2006, 05:09:03

Author Profile eMail author Edit

I have an application with 6 holes (each is about 3mm in dia.) as compressed air outlets for cooling purpose. The supply pressure is 5 bar. The measured air flow is 20L/min. With such setting, it was too noisy. But I can't reduce it to 10L/min as the cooling will then not effective. Would someone tell me how to estimate the noise (in deicel)? What's the relation / formula among the size of outlets, pressure, flowrate and the sound level? Or is it any suggestion to reduce the sound level with such setting? Thanks.







Post Reply | Recommend | Alert Administrator  

Powered by Engineers Edge

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer