VON MISES OR MAX. PRINCIPAL STRESS
Post Reply   Forum
Posted by: sunilk ®

03/16/2006, 20:22:43

Author Profile eMail author Edit

Hi,

I am doing an FEA ANALYSIS, its 2d PLANE STRESS ANALYSIS. I got my max. principal stress to be 1.33e4 lbf/in2 and my vonmises stress to be 1.65e4 lbf/in2. Which ONe shall I use ? the vonmises or the max. principal stress?

plz. reply

sunil








Post Reply | Recommend | Alert Administrator View All   | |

Replies to this message


Re: VON MISES OR MAX. PRINCIPAL STRESS
Re: VON MISES OR MAX. PRINCIPAL STRESS -- sunilk Post Reply Top of thread Forum
Posted by: Kelly_Bramble ®

03/17/2006, 09:12:07

Author Profile eMail author Edit

Von Mises Criterion is used to estimate fatigue failure with tensile and tensle-shear loading. In general, use Von Mises for determining failure in Ductile materials.

Maximum principle stress (normal stress) is used for determining failure in Brittle materials








Post Reply | Recommend | Alert Administrator Where am I? Original Top of thread | |
Re: VON MISES OR MAX. PRINCIPAL STRESS
Re: Re: VON MISES OR MAX. PRINCIPAL STRESS -- Kelly_Bramble Post Reply Top of thread Forum
Posted by: manteiv ®

03/17/2006, 09:22:56

Author Profile eMail author Edit

Here are links to some articles explainging the two:

Good luck,
Brian

----Commercial Competitor Links Deleted----

Administrator








Modified by Administrator at Fri, Mar 17, 2006, 09:41:48


Post Reply | Recommend | Alert Administrator Where am I? Original Top of thread

Powered by Engineers Edge

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer