How much % of load can be over loaded on HT motor ?
Post Reply   Forum
Posted by: dumpa_pad

03/28/2006, 00:17:29

Author Profile eMail author Edit

6600v,250kw,26amps HT motor made by NGEF is to be run slightly overloaded nearly up to 29amps. Is it advisiable to run or not with out do anything modification. if slightly do anything,pl give reply.

regards,







Modified by dumpa_pad at Tue, Mar 28, 2006, 00:18:19


Post Reply | Recommend | Alert Administrator View All   | Next |

Replies to this message


Re: How much % of load can be over loaded on HT motor ?
Re: How much % of load can be over loaded on HT motor ? -- dumpa_pad Post Reply Top of thread Forum
Posted by: randykimball
Barney
03/29/2006, 23:27:00

Author Profile eMail author Edit

You need to ask NGEF. It has to do with duty cycle, how often, how long, at 29 amps. It also is about heat removal.




The worst suggestion of your lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them.


Post Reply | Recommend | Alert Administrator Where am I? Original Top of thread

Powered by Engineers Edge

© Copyright 2000 - 2019, by Engineers Edge, LLC All rights reserved.  Disclaimer