Engineers Edge

Design and Engineering Forum

Engineering & Drafting Store | Engineering Data | Product Services Directory
Engineering Forum | Engineering Jobs | Engineering News
Engineering Calculators | GD&T Training ASME Y14.5M 1994

POSTING POLICY / RULES

Forum Moderators: randykimball, Administrator

pressure drop dilema
Post Reply   Forum
Posted by: lancealot72

07/24/2006, 13:25:51

Author Profile eMail author Edit

If anyone can help, I would appreciate it.

The problem:
I have a 1/4" peice of pipe with an ID of .18 flowing compressed air at 500cc/min at 50 psi, into a 1/8" piece of tubing with a small ID of .014. What kind of pressure drop will I encounter with this sudden contraction? will the pressure and flow fully recover down the 1/8" line. Not sure which formulas to use or how to go about it.

thanks in advance!!








Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post  

Powered by Engineers Edge

© Copyright 2000 - 2019, by Engineers Edge, LLC All rights reserved.  Disclaimer