Metal Bellows Expansion Joint
Post Reply   Forum
Posted by: rollinsc5 ®

08/17/2006, 18:10:48

Author Profile eMail author Edit

Hi all,
I work at a manufacturing facility that produces a variety of products including expansion joints. I recently was asked to do some research on metal bellow exp. joints. Occasionally and what appears to be at random some of our joints fail or can not be formed to the drawing. I need to find out things to look for such as what combinations of materials and thicknesses to use or not use when forming bellows. I'm going to be collecting information for a while and have little knowledge of such joints so any contributions would be appreciated. Thanks.







Post Reply | Tell a Friend (must be logged in) | Alert Admin About Post  

Powered by Engineers Edge

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer