Engineers Edge
gas ejector experiment
Post Reply   Forum
Posted by: jim_student

10/01/2006, 19:01:26

Author Profile
eMail author


Im currently working on a CFD project looking a gas ejector design, however I need a comparison of the results found from the CFD software. For this Ive managed to get hold of a small gas ejector and Im now trying to design a suitable experiment to let me measure the mass flow or pressure at the entrainment section and the exit of the ejector. My first thoughts was to connect the entrainment section up to a small manometer and calculate the difference in pressure. However after some thought I dont think this will provide accurate results as its a dead pressure.

Im really scratching my head now of how to go about this and would really appreciate any ideas or thoughts on this subject that anyone may have

Kind regards


John Moores Liverpool

Post Reply
Tell a Friend (must be logged in)
Alert Admin About Post

Powered by Engineers Edge

© Copyright 2000 - 2019, by Engineers Edge, LLC All rights reserved.  Disclaimer