60 microns groove

60 microns groove
	Post Reply		Forum

Posted by: estebanoliveros ^®

12/17/2006, 20:50:05

Author Profile
eMail author
Edit

Hi Dear colleagues,

I need to design and manufacture in acricic or other material 39 grooves of 10 mm of lenght, 90 microns width, 60 microns depth and separated 90 microns one of each other.

If someone know a method, or can give me a recomendation, please help me,

Best regards,
Esteban.

Post Reply
Tell a Friend (must be logged in)
Alert Admin About Post

View All

| Next |

Replies to this message

Re: 60 microns groove

Re: 60 microns groove -- estebanoliveros Post Reply Top of thread Forum

Posted by: k_rg ^®
Tweety Bird
01/29/2007, 09:10:49

Author Profile
eMail author
Edit

You might have found a solution to your problem by now. If not,
you can try micro grooving in a highly polished steel mold with laser and cast clear acrylic resin over it. Avoid fax release agents which may clog the grooves.

R.Gopal

Post Reply
Tell a Friend (must be logged in)
Alert Admin About Post Where am I? Original Top of thread

Re: 60 microns groove
Re: 60 microns groove -- estebanoliveros	Post Reply	Top of thread	Forum