Engineers Edge

[Home] [Design Resources] [Engineering Jobs] [Tell A Friend] [Technology Store]

Burst strenght of 430 Stainless Steel Tube
Post Reply   Forum
Posted by: Henry

12/04/2002, 14:35:28

I'm hoping someone can help me. I have a stamped stainless steel part, a flanged tube. The material is 430 stainless, which has been stamped, annealed and then stamped again at least 3 times into the final shape. The approx dimensions of the part are 1.25" lenght, 1.5" inner diameter and a .050" wall thickness. Can anyone tell me how I calculate a burst pressure for this part? I have a requirement to perform a 400 psi leak test, but want to be sure the material hold up before attempting this.Thanks in advance for your helpHenry

Post Reply | Recommend | Alert Rate View All   | Next |

Replies to this message

-----Re: Burst strenght of 430 Stainless Steel Tube John Andrews 0 1531 bytes 12/10/2002, 12:52:08

Powered by Engineers Edge

© Copyright 2000 - 2019, by Engineers Edge, LLC All rights reserved.  Disclaimer