Angularity vs Profile

Angularity vs Profile
	Post Reply		Forum

Posted by: Antonio Patino

12/12/2002, 16:39:40

Edit

I have a blue print with the following dim for the same surface (a surface at 30 degree inclination).Profile / +.000 -.012 / A / B / CAngularuty / .002 / A / B / CMy question is if the angularity is in violation of the profile by .001 or if the surface can be from +.000 to -.012 as long as it is flat within .002 from a 30 degree imaginary boundaryThanks in advance

Post Reply | Recommend | Alert

Rate

View All

| Next |

Replies to this message

-----Re: Angularity vs Profile John-Paul Belanger 0 456 bytes 12/12/2002, 21:49:55