Results 1 to 3 of 3

Thread: Differences in Chilled water loop ∆P measured at different places

  1. #1

    Join Date
    Jul 2020
    Posts
    1

    Differences in Chilled water loop ∆P measured at different places

    If a chilled water pumping system was maintaining 15 psi ∆P in a closed loop at the pumps in the basement of a 6 story building, would the ∆P read differently at each ascending floor?

  2. #2
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    908
    Homework?

  3. #3
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    If this is a closed system pressured above that produced by gravity then the pressure is the same everywhere except during flow.

    If it is a gravity system the system will vary with elevation.

    See: Head Pressure https://www.engineersedge.com/hydrau...sure_10054.htm
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •