Results 1 to 2 of 2

Thread: plzzz....i m new to manufacturing

  1. #1
    Associate Engineer
    Join Date
    Mar 2011

    plzzz....i m new to manufacturing

    i need to design a radial cam with oscillatiing follower .

    the follower should rise with an angular deflction of 120 degrees

    how should i go about this in solidworks 2010 cam toolbox...

    my second question is..will the drawing i make in solidworks be enough to give to the manufacturer to fabricate this cam?...

  2. #2
    I do not use solidworks so I can not answer your first question. I can answer the second one. The drawing may not provide enough information, but the solid you created to produce the drawing will. If possible send the solid part in a neutral format (parasolid, STEP,IGES) with the drawing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts