Results 1 to 2 of 2

Thread: Blade design for a swirl generator (cyclonic separator)

  1. #1
    Associate Engineer
    Join Date
    Feb 2013

    Question Blade design for a swirl generator (cyclonic separator)

    I have been doing alot of research trying to find an answer but still i couldnt :S so i will show you the details and then will ask the question
    here you go

    so if you look at the fan and cyclone (which where the fan is going to be installed) i know there are some problem to fix and some of the problem i cant find an answer for it here are the problem
    1- how can i decide the blade curve radius ?
    2- the top cone on what basis should i design it ?
    3- the bottom cone i know it should be 0 radius at the tip
    4-the blade height on what basis should i design it as well
    5- on what basis i am going to shape the blade (Airfoil)
    and yes i am using solidworks 2012

    Admin. ---> images should be attached directly to forum
    Last edited by Kelly Bramble; 02-11-2013 at 12:51 PM. Reason: Removed html and url attachment

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Bold Springs, GA
    Associated file with the above post...

    Attachment 562Attachment 563Attachment 564Attachment 565

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts