Results 1 to 2 of 2

Thread: inspection method of a machined part

  1. #1
    Associate Engineer
    Join Date
    Mar 2013

    Unhappy inspection method of a machined part

    can you let me clarify what can be the flatness of a plane if the parallelism is 10 Microns and their thickness is around 3 mm

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Bold Springs, GA
    For that surface which the parallelism id defined, the allowed flatness will not be greater than 10 Microns.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts