Results 1 to 3 of 3

Thread: Measure of Basic Dimension

  1. #1
    Associate Engineer
    Join Date
    Mar 2016
    Posts
    1

    Measure of Basic Dimension

    We have came across Basic Dimension in the drawing. We know there is no tolerance applicable for the Basic Dimension. But we dont know, Is the Basic Dimension to be captured in the dimension report of PPAP, to see what actual sample value is....

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,107
    If there is a Basic Dimension - then there should be a tolerance somewhere on the engineering drawing associated with the basic dimension... If there is not a tolerance associated then default gauging or tooling tolerances apply..
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Associate Engineer
    Join Date
    Apr 2016
    Posts
    4
    As it always have some comment about the tolerances in the drawing if it is not indicated directly next to the basic dimension. For examples, the comments will lead you to another tolerance standards. Hope it is helpful

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •