Sounds like the sort of interrupter used in presses or production line shear cutters.
I am interested in a Mechanism which i will have to use in a machine i am working on. The motion of the mechanism has to be it halts for 6 seconds then makes a stroke in the liner direction in 3 seconds and then again halts for 6 seconds. The length of the stroke should be 300mm.
Please help with such mechanism.
NOTE: It is a 1000mm x 1400mm machine therefore can not use CAMs of larger size.
Sounds like the sort of interrupter used in presses or production line shear cutters.
You need to describe the full motion. What you describe is the requirement for only 1/2 of the units stroke, if this is the extension stroke then what are the requirements for the retraction stoke?