Results 1 to 3 of 3

Thread: O-rings dynamic flange application

  1. #1
    Associate Engineer
    Join Date
    Apr 2018
    Posts
    4

    Question O-rings dynamic flange application

    We have an article on static O-rings in a flange arrangement
    https://www.engineersedge.com/genera...tic_flange.htm

    And dynamic O-rings in a reciprocating cylinder arrangement
    https://www.engineersedge.com/genera...c_cylinder.htm

    But what does an engineer use in a dynamic flange arrangement? For example, if in the first article, the two flanges were to rotate with respect to each other. Or is there a good reason that this is a very bad idea and I need to redesign things to make it look like the second article? Do just give a little more depth so the compression is only 10-30%? I'm making a high pressure air swivel joint.

    Regards,

    Harry R. Burger
    Mechanical Engineer
    CSWP

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Static means that the two flanges are to not move relative to one another. Dynamic means movement and the o-rings are compressed less to allow movement and less friction. For rotation use the dynamic design.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    908
    I may be wrong but I think most if not all of the dynamic seals in standard commercial rotary unions are of the cylindrical type. Have you contacted some of those manufacturers? There's a lot of expertise there, and some of them have probably already done what you're trying to do.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •