Results 1 to 4 of 4

Thread: Drawing projections - QUESTION

  1. #1
    Associate Engineer
    Join Date
    Jul 2018
    Posts
    2

    Confused Drawing projections - QUESTION

    Hello everybody, new in the forum.

    Hope you can help me with this basic doubt.
    The attached pdf contains 3 options dimensioning the same part (formed channel)

    Can you help me to idetify wich ones are correct or incorrect?

    Thanks, appreciate your help!
    Attached Files Attached Files

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,204
    First or third angle projection?
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Project Engineer
    Join Date
    May 2015
    Posts
    147
    my 2 cents:

    Either 2 or 3 are correct third angle views. Two seems more comfortable.

    The 2.50 can be eliminated as it is double dimensioning.

    The 5.63 between the two views as on option 3 makes it easier to relate the dimension to front and side views.

    There is no call out for the corner breaks.

  4. #4
    Associate Engineer
    Join Date
    Jul 2018
    Posts
    2
    Thanks for your replies.

    All are 3rd angle projection.

    I understand that option 1 is not correct.

    Greetings!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •