Results 1 to 2 of 2

Thread: Output force of lever-crank mechanism

  1. #1

    Output force of lever-crank mechanism

    Clamp Force line drawing.pdf

    Hi guys.

    Am new here and was just looking for a bit of advice on how I would go about solving the above (more information can be provided as needed, sorry for the poor quality of image!). In the sketch, points a & b are fixed pivot points and x, y & z are movable pivot points, Fi is 100N and I want to find output force Ff.

    I am designing a clamp system and need to work out how much force will be output through the mechanism with a specified input linear force. I have done such calculations in the past but I cannot for the life of me remember where to even begin with this one!

    I know it is probably much more simple than I am making it for myself so I was hoping the clever people on here could help me out.

    Thanks in advance!
    Last edited by jkwreed1994; 07-15-2020 at 05:49 AM. Reason: Missing information!

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Bold Springs, GA
    The math is somewhat tedious, I recommend you use the 2D statics modeler on this website.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts