Engineering Design for Manufacturability and Assembly DFM DFA Book
This is a two Book series, Volumes I & II are included in this purchase.
Soft Spira Bound
- This engineering design reference book provides an overview of manufacturing processes, application, design considerations, required features, and achievable mechanical tolerances for selected manufacturing processes. Other topics organizational culture, concurrent engineering practices, cost estimating, engineering design approach, designing for high and low volume targets, computer technology and DFM/DFA, major manufacturing paradigms, and methods overview to select the proper manufacturing process.
This book has been written exclusively for engineers, designers, and others seeking to create designs with manufacturability in mind. The Book is a two Volume (I & II) 450+ pages and soft cover bound.
Alternatively, online version may be accessed with an annual premium membership
Click --> Engineers Edge Memberships
Table of contents and front matter-->
Engineering Design for Manufacturability and Assembly Reference Book
Written and Illustrated by Kelly Bramble et. al. revision "R".Subject matter Chapters Include:
- Introduction
- Manufacturing Operations/Procedure
- Mechanical Dimensions and Tolerances Overview
- Cleaning Processes, Design for Coatings & Platings
- Design for Marking and Identification
- Materials and Machinability
- Design for Machining - General
- Sawing and Cutoff Machines
- Turning - Lathes
- Drilling and Reaming Hole Machines & Design
- Boring Manufacturing
- Honing Manufacturing
- Trepanning, Gun Drilling, STS Machining
- Threading (Screw Threads)
- Hobbing - Overview
- Broaching
- Surface Grinding
- EDM (Electrical Discharge Machining)
- Castings Manufacturing
- Forging
- Metal Extrusion Manufacturing
- Electroforming
- Rapid Prototype
- Injection Molding Plastic
- Plastic Extrusion
- Plastic Vacuum Thermoform
- Stamping and Forming - Sheet Metal
- Spinning (Spun) Parts (Metal) Manufacturing
- Laser Cutting
- Abrasive Water Jet Cutting
- Design for Adhesives
- Design for Welding
- Fixtures and Jigs - Design for Work Holding
- Design for Corrosion
- Inspection and Quality
- Engineering Drawings and Manufacturing
- Computer Aided Design (CAD) and Manufacturing
- Design for Assembly DFA
- Design for Maintainability
- Reverse Engineering
- Laser Welding Plastics
Appendix A Generic Part Manufacturability Check Sheet A.1 ANSI Size Drills A.2 ISO (Metric Size Drills) and Conversion to Inches A.3 ANSI Screw Threads Sizes A.4 ACME Thread Forms A.6 Tape Pipe Threads A.10 Industry Finish and Coating Specifications Reference A.12 Sheetmetal Gage Sizes A.22 Welding Electrodes A.23
This product was added to our catalog on Sunday 26 September, 2021.
