PDA

View Full Version : Dimensioning Tolerancing GD&T Discussion Forum | GD&T Training



Pages : [1] 2 3

  1. Engineers Edge Dimensioning and Tolerancing Forum Archive
  2. Need some action folks...
  3. Baseline or chain dimensioning (Para 5.2.2 from 1994 removed in 2009)
  4. true position of Slot
  5. Primary Datum
  6. Tolerances of Thread Feature
  7. re.position tolerance datum callout doubt
  8. Circularity / Roundness
  9. Hole Positiona tolerance
  10. Datums on drawings
  11. Thru holes in a hollow cylinder (pipe, tube, or hollow shaft)
  12. Direction to tap thread?
  13. Holes in-line
  14. Spline inspection by CMM - Fourier Series
  15. A Level engineering help???
  16. Target datums ?
  17. Difference in SPF output in ISO1101 and ASME 14.5
  18. Open tolerance for drawing
  19. Using a profile dimension with a basic dimension to control a radius
  20. Basic vs. TED
  21. Wall Thickness Variation - GD&T
  22. Overriding the Envelope Requirement in ISO GPS
  23. Hole Tolerance for Press Fit dowel Pin
  24. Faro Arm vs CMM (Aerospace)
  25. GDand T of slot
  26. Number of decimal points for a spec?
  27. Profile of a Surface
  28. Having trouble with size
  29. Diameter vs height
  30. MAX Dimensions
  31. Callout for hole pattern on variable thickness
  32. Dowel Pin Tolerance Charts V Dia?
  33. Composite called out
  34. Aluminum Casting acting gooey
  35. Use of "TYP" in drawings
  36. Aluminum Pulley and Steel C3 bearing
  37. Cruce de tolerancias
  38. Philosophy of Determining CPK for a flatness tolerance.
  39. center of a irregular circle
  40. True Position callout
  41. Meaning of a radial tolerance
  42. Notes on Prints
  43. Dimond Shape on print
  44. Runout or Concentricity
  45. Diametrical True Position with Zero Tolerance
  46. LMC-Least Material Condition
  47. Tolerance of holes shown on centerlines
  48. Measurment Discrimination
  49. composite profile tolerance
  50. Angularity Tolerance
  51. How do I calculate a position with only a width of a spline and angle between splines
  52. Double up with tolerances
  53. LMC applied to threaded holes
  54. Iso metric Screw M8 Major Diameter Tolerance
  55. Profile tolerance Question
  56. Double Plus or Minus Tolerances
  57. Hello, Just Joined
  58. GD&T question
  59. How to control the Size and Position of 2 Very Odd Openings
  60. True positional call out
  61. Is it acceptable to tolerance the same diameter feature with two tolerances?
  62. True Position of a diameter back to 2 datums.
  63. torque vs thread engagement
  64. Flatness with Datum Alternative
  65. Drilled Hole positioning query on threaded bolt
  66. True position to holes on not datum surfaces... is this allowed
  67. features on a common centerline with no positional tolerance
  68. Composite tolerancing of features on a cylinder
  69. True position question - hole on angle
  70. stated accuracy of portable CMM arm and real world usage
  71. Feature control frames on metric prints
  72. tolerance with MMC
  73. True Position on CMM result vs Equation
  74. ASME Y14.5-2009, Geometric Boundaries II GD&T Reference Book
  75. GD&T Training ASME and ISO Standard Onsite
  76. Review Current GD&T Theory and Inspection Data Algorithms
  77. Hole positions with different tolerances that are in the same line?
  78. Runout tolerance measuring device
  79. Dimensioning angled feature
  80. Complicated Parallelism Question
  81. All About Optical Flats
  82. Quick question about ISO tolerances (H7)
  83. MMC and RFS in same feature control frame
  84. Choosing Geometric Dimensioning and Tolerancing GD&T Tool
  85. Is it legal to use a Centerline as a Datum Feature?
  86. Runout Inspection between Hole and Arc
  87. Datum feature on one side of an extruded shape?
  88. Datums call out @ part center is correct?
  89. Parallelism between an axis and a plane
  90. Apply GD&T on Threaded Feature?
  91. GD&T Spherical Radius
  92. Inline Keyways
  93. Company Standards - misapplication of GD&T?
  94. Japanese GD&T standard?
  95. Need Help Interpreting angles called out in minutes and seconds
  96. Tolerance for Valve seat
  97. Question about tolerances in plastic extruded parts
  98. Help with identifying datums
  99. Profile of Surface vs Profile of Line
  100. position control of hole pattern without datum & modifier