B18.2.3.10M - Square Head Bolts (Metric Series)
This Standard covers the general and dimensional data for standard metric
series square head bolts. The inclusion of dimensional data in this Standard is
not intended to imply that all of the products described are stock production
items. Consumers should consult with suppliers concerning the availability of
products.
|
B18.25.2M - Woodruff Keys and Keyways
This Standard covers requirements for square and rectangular parallel keys
and keyways intended for both alignment of shafts & hubs, and transmitting
torque between shafts and hubs.
|
B18.25.1M - Square and Rectangular Keys and Keyways
This Standard covers requirements for square and rectangular parallel keys
and keyways intended for both alignment of shafts & hubs, and transmitting
torque between shafts and hubs.<
|
B18.29.1 - Helical Coil Screw Threaded Inserts---Free Running and Screw Locking (Inch Series)
This Standard is intended to delineate the dimensional data for the inch
series helical coil screw thread insert and the threaded hole into which it is
installed. Appendices that describe insert selection, STI (Screw Thread Insert)
taps, gages and gaging, insert installation, and removal tooling are also
included.
|
B18.21.2M - Lock Washers (Metric Series)
This Standard covers the dimensions, physical properties, and methods of
testing for helical spring and tooth lock washers. The inclusion of dimensional
data in this Standard is not intended to imply that all products DE- described
are stock production items. Consumers should consult with suppliers concerning
availability products.
|
B18.6.7M - Metric Machine Screws
This standard covers the complete general and dimensional data for metric
flat countersunk, oval countersunk and pan slotted and recessed head machine
screws metric hex flange head machine screws recognized as standard. Also
included are appendixes which provide specifications and instructions for
protrusion gaging of flat countersunk head screws, across corners gaging of hex
head screws, penetration gaging and wobble gaging of recessed head screws, set
forth clearance hole recommendations, and establish the Government standard
items and part numbering system. The inclusion of dimensional data in this
Standard is not intended to imply that all of the products described are stock
production sizes.
|
B18.2.3.9M - Metric Heavy Hex Flange Screws
This Standard covers the complete dimensional and general data for metric
series heavy hex flange screws recognized as American National Standard. The
inclusion of dimensional data in this Standard is not intended to imply that all
products described are stock production items. Consumers should consult with
suppliers concerning availability of products. Nuts and hex flange nuts. The
inclusion of dimensional data in this standard is not intended to imply that all
of the nut sizes in conjunction with the various options described herein are
stock items. Purchasers are requested to consult with manufacturers concerning
lists of stock production prevailing-torque hex and hex flange nuts.
|
B18.2.4.1M - Metric Hex Nuts, Style 1
This standard covers the complete general and dimensional data for metrics
hex nuts, style 1, recognized as an American National Standard. The inclusion of
dimensional data in this standard is not intended to imply that all of the nut
sizes in conjunction with the various options described herein are stock items.
Purchasers are requested to consult with manufacturers concerning lists of stock
production hex nuts, style 1.
|
B18.2.3.4M - Metric Hex Flange Screws
This Standard covers the complete dimensional and general data for metric hex
flange screws recognized as American National Standard. (b) The inclusion of
dimensional data in this Standard is not intended to imply that all products
described are stock production items. Consumers should consult with suppliers
concerning availability of products.
|
B18.2.3.1M - Metric Hex Cap Screws
This standard covers the complete general and dimensional data for metric hex
cap screws recognized as American National Standard. The inclusion of
dimensional data in this standard is not intended to imply that all of the sizes
in conjunction with the various options described herein are stock items.
Consumers are requested to consult with manufacturers concerning lists of stock
production hex cap screws. Hex cap screws purchased for Government use shall
conform to this standard, and additionally to the requirements of Appendix III.
|
|