Random stacked graphene create chemical sensor.

Related Resources: Engineers Edge

Random stacked graphene create chemical sensor.

Engineering Design and Technology News Home

Engineers Edge - The researchers created the one-atom-thick carbon lattice flakes by placing bulk graphite in a solution and bombarding it with ultrasonic waves that broke off thin sheets. The researchers then filtered the solution to produce a graphene film, composed of a haphazard arrangement of stacked flakes, that they used as the top layer of a chemical sensor. When the graphene was exposed to test chemicals that altered the surface chemistry of the film, the subsequent movement of electrons through the film produced an electrical signal that flagged the presence of the chemical.

The researchers experimented by adjusting the volume of the filtered solution to make thicker or thinner films. They found that thin films of randomly stacked graphene could more reliably detect trace amounts of test chemicals than previously designed sensors made from carbon nanotubes or graphene crystals.

The results are accepted for publication in the AIP's journal Applied Physics Letters.

The researchers theorize that the improved sensitivity is due to the fact that defects in the carbon-lattice structure near the edge of the graphene flakes allow electrons to easily "hop" through the film.

Article: "Chemical Sensors Based On Randomly Stacked Graphene Flakes" is accepted for publication in Applied Physics Letters.

Authors: Amin Salehi-Khojin (1, 7), David Estrada (2, 3), Kevin Y. Lin (1), Ke Ran (4, 5), Richard T. Haasch (5), Jian-Min Zuo (4, 5), Eric Pop (2, 3, 6), and Richard I. Masel (7).

(1) Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign
(2) Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign
(3) Micro and Nanotechnology Lab, University of Illinois at Urbana-Champaign
(4) Department of Material Science and Engineering, University of Illinois at Urbana-Champaign
(5) Materials Research Laboratory, University of Illinois at Urbana-Champaign
(6) Beckman Institute, University of Illinois at Urbana-Champaign
(7) Dioxide Materials, Champaign, Ill.

Modified from materials provided by American Institute of Physics

Link to this Webpage:

Copy Text to clipboard