Products and Services Directory: engineering > Engineering Standards Specifications > ASTM International Standards Specifications

Prev Page | Next Page

Pages: 1 [2] 3 4 5 6 7 >>

F1597-02 Standard Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch

This test method covers the measurement of actuation force or contact force, or both, of a membrane switch utilizing a pre-determined resistance value.

 

F1570-01e1 Standard Test Method for Determining the Tactile Ratio of a Membrane Switch

This test method covers the determination of the tactile response of a membrane switch as defined by tactile ratio.

 

F1896-98 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

This test method covers the determination of the electrical resistivity of a conductive material as used in the manufacture of a membrane switch. This test method is not suitable for measuring force sensitive conductive materials. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

 

F1812-02 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

This test method is used to determine the electrostatic discharge (ESD) shielding effectiveness of a membrane switch assembly. This test method may be used to test a membrane switch to destruction, that is, to determine its maximum ESD shielding effectiveness, or it may be used to test the ability of a membrane switch to withstand a predetermined level of exposure.

 

F1689-05 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch

This test method covers the determination of the insulation resistance of a membrane switch.

 

F1681-96 Standard Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit

This test method covers the determination of the current carrying capacity of a conductor as part of a membrane switch.

This test method may be used to test a circuit to destruction, that is, to determine its maximum current carrying capacity, or it may be used to test the ability of a circuit to withstand a desired current level.

This test method applies only to static conditions, and does not apply to contact closure cycling of a membrane switch under current load (test method forthcoming).

 

F1680-02 Standard Test Method for Determining Circuit Resistance of a Membrane Switch

This test method covers the determination of the circuit resistance of a membrane switch utilizing a predetermined force.

 

F1663-95 Standard Test Method for Determining the Capacitance of a Membrane Switch

This test method covers the determination of capacitance(s) of a membrane switch.

 

F1662-95 Test Method for Verifying The Specified Dielectric Withstand Voltage of a Membrane Switch

 

F1661-96 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch

This test method covers the determination of the contact bounce time of a membrane switch.

 

Prev Page | Next Page

Pages: 1 [2] 3 4 5 6 7 >>

Contribute Article
Spider Optimizer

© Copyright 2000 - 2018, by Engineers Edge, LLC www.engineersedge.com
All rights reserved
Disclaimer | Feedback | Advertising | Contact

Date/Time:

List Your Company HERE!! Add SEO Directory Listing | Advertising Information