Internal Thread Dimensions for Class 5 Interference-Fit Threads |
Internal Thread Dimensions for Class 5 Interference-Fit Threads ANSI/ASME B1.12-1987 (R1998). The following thread detail specifications are typical for studs applications.
Data within design chart is based on internal threaded members being steel ASTM A-325 (SAE Grade 5) or better. Le = length of engagement. |
|
Minimum Threads Protruding Beyond Nut |
A minimum thread protrusion length is given to ensure that all the threads are engaged. This is required to ensure a full-strength fastener. Equipment component drawings should specify the type, length, and size of bolt, stud, bolt-stud, etc. to be used to obtain the proper thread protrusion. |
|
Metric Threads ISO 724 |
ISO 724 - ISO general-purpose metric screw threads - Basic dimensions (DIN 13), the standard in Europe, is recognizable by its cylindrical outer and inner diameter and its precise outer diameter in millimeters. |
|
Machine Dowel Pins Chart ANSI ASME |
The following chart is of Machine Dowel Pins Chart per. ANSI ASME B18.8.2
ANSI ground machine dowel pins (hardened) are furnished in two diameter series: Standard Series having basic diameters 0.0002 inch over the nominal diameter, intended for initial installations; and Oversize Series having basic diameters 0.001 inch over the nominal diameter, intended for replacement use. |
|
|