materials | Engineering Materials

Engineering Design Data: Menu - materials

Engineering Materials

Pages: 1 [2] 3 4 5 6 7 >>

Magnesium Casting Alloys Typical Mechanical Properties

Magnesium Casting Alloys Typical Mechanical Properties, Elongation, Tensile Temper, Shear Strength, Hardness, Electrical Conductivity

DIN 17100 Fatigue strength diagrams

Fatigue strength diagrams of general purpose structural steels, DIN 17100, test piece diameter d = 10 mm

Fatigue strength diagrams DIN 17200 - EN 10083

Standard Tempered Structural Steel in quenched and tempered condition, test piece diameter d = 10 mm.

Metallic Materials and Elements for Aerospace Vehicle Structures

This is a source of design allowables, which are those strength properties of metallic materials and elements (primarily fasteners) that are widely used in the design of aerospace structures.

Mechanical Properties of Aluminum Sand Castings

Cast Aluminum Alloys These are used for parts of complex shapes by sand casting, permanent mold casting, and die casting.

Atomic Numbers Weights Melting Temperatures

Atomic Elements Symbols, Atomic Numbers, Weights and Melting Temperature point

Outgassing Rates Stainless Steels

Outgassing rates of stainless steels, along with the surface treatment and pumping time.

Outgassing rates of aluminium table

Outgassing rates of aluminium table: Note the different methods of measurement and treatment of samples.

Critical Temperature and Melting Point for Common Engineering Materials

Critical Temperature and Melting Point for Common Engineering Materials

Steel Equivalent Cross Reference

Carbon Steel Equivalent Designations / Specifications

Prev Page | Next Page

Pages: 1 [2] 3 4 5 6 7 >>