Engineering Design Data: Menu - civil engineering

 
Civil engineering architecture related
Prev Page | Next Page

Pages: 1 [2] 3 4 5

Wood Engineering Properties #3 Engineering Properties
Strength and engineering properties of some commercially important woods grown in the United States (inch–pound) 
Wood Engineering Properties #2
Strength and engineering properties of some commercially important woods grown in the United States (inch–pound) 
Wood Engineering Properties for Hardwoods
Strength and engineering properties of some commercially important woods grown in the United States (inch–pound)
Sound System Design Equations
Sound Power (W) - the amount of power a source converts to sound in watts.
Room Loudness Sones Reference Chart
System Design Guidelines for Room Loudness. See Sound Loudness Design Equations for relative equations.
Concrete Anchor Tension Pullout and Design Calculator
Concrete anchor tension, pullout, design equations and calculator per ACI 318-02. Concrete Anchor Group Pullout Tension Design Calculator, Concrete Anchor in Tension and Shear Near Edge, Concrete Anchor Group Tension and Shear Fasteners Near Two Edges Based on ACI 318-02 Calculator, Concrete Anchor Group Tension and Shear Fasteners Near Two Edges Based on ACI 318-02 Calculator Case # 5
Acoustic Sound Pressure Level Chart
Acoustic sound pressure level chart data. Sound pressure or acoustic pressure is the local pressure deviation from the ambient (average, or equilibrium) atmospheric pressure, caused by a sound wave. In air, sound pressure can be measured using a microphone, and in water with a hydrophone.
Wind Loading Analysis MWFRS and Components/Cladding Calculator
Wind Loading Analysis MWFRS and Components/Cladding Per ASCE 7-02 Code for Low-Rise, Enclosed Buildings with <=60' and Roof <= 45 deg; Using Method 1: Simplified Procedure (Section 6.4)
Wind Loading Analysis Simple Building - Engineers Edge
Wind Loading Analysis Simple Building Per ASCE 7-98 Code for Low-Rise Buildings with h
Reinforcing Rebar Engineering Data
Reinforcing Bar Datat Tables, Typical specification: ASTM A615 Grade 60 Deformed Bar
Prev Page | Next Page

Pages: 1 [2] 3 4 5

© Copyright 2000 - 2017, by Engineers Edge, LLC All rights reserved.
Disclaimer