Engineering Design Data: Menu - hardware

 
ANSI ISO Engineering Hardware
Prev Page | Next Page

Pages: << 7 8 9 [10] 11 12 13 >>

Grade 4.6 Countersunk Bolt Capacities Table
Countersunk Bolt Loading Capacities Grade 4.6 material S275 Table, Non-Preloaded Countersunk Bolts, Grade 4.6 Countersunk Bolts material S275
Grade 10.9 Bolts Loading Capacities Table
Bolt Loading Capacities. Non-preloaded Ordinary Bolts. Grade 10.9 Bolts per. S355. BS 5950-1: 2000 BS 4190: 2001
Grade 8.8 Bolt Loading Capacities Table
Bolt Loading Capacities. Non-preloaded Ordinary Bolts. Grade 8.8 Bolts per. S355. Bearing values assume standard clearance holes.
Bolt Loading Capacities Ordinary Bolts. Grade 4.6 Bolts
Bolt Loading Capacities. Non-preloaded Ordinary Bolts. Grade 4.6 Bolts per. S355
Forged Bolt Type Chain Shackles
Dimensions of Forged Bolt Type Chain Shackles and Bolt Type Anchor Shackles
Dimension Table for T-Slots, Bolts, and Nuts Table Chart
Dimension Table for T-Slots, Bolts, and Nuts per. American National Standard T-Slots ANSI/ASME B5.1M-1985.
Standard T-Bolts Dimensions Table Chart
Standard T-Bolts ANSI/ASME B5.1M-1985 Dimensions and Tolerances Table
Countersunk Screws Torque Table Metric, ISO
Metric ISO Countersunk head steel screws Torque Table. Preloads and tightening torque for Metric ISO countersunk head steel screws with hexagon socket head or similar heads. Typical values for countersunk heads screws with hexagon/hexalobular socket or associated nut, friction coefficient µ = 0.14, Fine thread and course threads apply
Torque for Hexagon Head Screws with UNF Threads Table
Preloads and tightening torque for steel shank screws with UNC/UNF threads and head contact area sizes according to ASME B18.2.1, ASME B18.3 and ASME B18.2.2 friction coefficient µ = 0.14, Utilization of minimum yield = 90%
Torque Table Hexagon Screws with UNC Threads Table
Typical Torque for Hexagon Head Screws with UNC Threads. Preloads and tightening torque for steel shank screws with UNC/UNF threads and head contact area sizes according to ASME B18.2.1, ASME B18.3 and ASME B18.2.2
Prev Page | Next Page

Pages: << 7 8 9 [10] 11 12 13 >>

© Copyright 2000 - 2021, by Engineers Edge, LLC All rights reserved.
Disclaimer